I framed up Beach Roses today.
I like this frame because it reminds me of bleached beach wood that I used to collect.
Click to enlarge
Unfortunately you can't see the pearls in this picture unless it is enlarged.
This blog is intended to be a record of my crafting efforts, though from time to time I expect it will take a wander through the other stuff that gets in the way!
It is tiny, just 3-1/2" square, but very detailed.
Unfortunately there has been a lot of frogging going on here!
First of all, the chart is tiny and a little hard to read. (Would it have killed them to print it on a full page instead of a half page)? Also, there is just enough variation in the wave border, and just slight variations in the color to make it difficult! One little mis -stich and it is hard to find where you have gone wrong.
All that said, I love the design, and I am looking forward to finishing it up.
I am stitching it on 28 count Lambswool, using DMC.
Here is my progress so far:
(Click to enlarge)
Ready, willing and able to stand up against any drafts that try to come in under my porch door!
2) The edges have already been zig-zag stitched, but if you would like to make a ruffled edge, turn under the edges on the ends and stitch. (If you do not want the tied enclosure, you can sew up the end and then later hand stitch the other end when it is completed).

4) Turn it right side out. You now have a sleeve. Just press it very lightly (no hard creases).
5) Next, I cut 3 pieces of floss (18 single strands) about 24" long. I used DMC 221 because it matched The Red Thread in my design. (You could use any cording you wanted. You just have to make sure you can weave it through the linen without ripping it). About an inch from the end of the design, starting in the front, center of the design, I wove the floss all around it.
6) Then I threaded some wooden beads onto the end of the floss and tied a knot. I wrapped the floss around the sleeve a couple of times and pulled it up tightly
7) The stuffing was next. For a shelf sitter, you can use a light fiber fill, but for a draft dodger you need something a bit heavier. After quite a bit of experimentation, I decided to use Feline Pine, which is compressed pine pellets. This can be found in specialty pet food stores. Do not confuse this with regular cat litter, which did not work well at all. The pellets are much larger, and it is completely dustless. Of course you can also use dried beans or rice.
Although you could put the filling in directly, I decided to enclose it in pantyhose. This is a little tricky because the pantyhose will just keep stretching, so the best thing to do is to put the leg into the opening and start filling it a little at a time. As you fill it, the weight will drag it down to the bottom of the sleeve. This works much better than trying to stuff it in.
When it is filled. tie off the top of the pantyhose leg in a knot.
8) I finished the other end off in the same way, added the beads, and pulled it up tight.
(Click to enlarge all images)
This is Connected, the twelfth and final design in The Red Thread. I finished this up on Friday. The two little snowmen (snow people) are now connected!
I took a picture but it seems a little washed out. It is over a yard long, and my photography skills are not the greatest! Here is how the whole thing looks:
I am still working out how to finish it. As soon as I do, I will post a picture.
Oh my gosh!
This was a fun, quick stitch! I really enjoyed all the colors.
Thank you so much Helen!Rowyn at Stitching under the Southern Cross
Laurel at An Artist's Journey
Desi at Go to Your Studio and Make Stuff
Chris et al at Strange Maine
Carol et al at Gallery of Samplers
There are so many more!
I meant to post this last week, but never got around to it.
The Saturday before last we went out wandering, looking for yard sales and other good stuff. As it turned out there was nothing really interesting near us, so we widened the circle a bit.
Somehow we wound up in the little village of Lafayette, NJ. There was a little merchants village there.
One of the shops was Village Antiques and Collectibles.
It turns out that it was a special edition kit by DMC.
It is hard to tell from the picture (fingerprints and smudges included), but it is a 4" deep cabinet.
The most amazing thing about it is the elaborate chimes! I thought it would just strike the hour, but it also has a different chime for the half hour, and yet a different chime for the quarter hour!
The case has a few scratches that need to be touched up, but other than that it is in excellent condition.
I do not know when it came out, but it was signed in 1963.


It is very small, only 43 X 34 stitches. It came with a tiny heart-shaped charm, but the blue beads were missing, so I ordered them.
Now, I am thinking that I might experiment with French Knots instead of the beads. Not ready to start this project just yet, but I thought it would be an appropriate celebration for blueberry season!
Now for the hard part, finishing him as an ornament!
I have determined that he needs to be finshed as a rectangle. Originally I wanted to turn him into a circle or an oval but that will not work. His little hat throws the dimensions off too much.My next project, (besides my braided rug) will be 'Tis the Gift from La-D-Da.
It is a small design and should stitch up quickly.
I am stitching it on 32 count Lambswool, using Sampler Threads.
I am a little concerned about the Sable (brown). Most of the color is a nice mellow brown, but at the end it goes to a blackish color. I really don't think this looks too good in the border and in the letters. It is just too much of a change in color.
This is the problem I have with the hand-dyed threads. I think they need to be more subtle in the color changes. I was considering ripping it out, but I guess I will let it go and see how it looks.
I have made a small start.
The next in the series is County Fair.
With that finished, I wanted to sneak in a Christmas ornament before I started anything else.
Earlier, I fell in love with Valerie Pfeiffer's Christmas Chick when I saw it on Helen's blog.
I have made some good progress on it, but there are quite a few partial stitches and outlining that will take some time. It will be several more evenings until it is finished.
I am stitching it on 27 ct Danish linen, using DMC.
I am not sure yet how I will finish it. I have some red velveteen for the backing, and some velveteen piping for the edge, but I am still trying to decide on the shape.
I can never seem to get a good picture of this one. It seems too flooded with light. The colors are a bit bolder than they appear.Hopefully I can finish this up soon, although I know the bottom border will take a while! I am not sure how I will finish this one, whether I willl use a mat or not to frame it.
I am already thinking about the next project. There is an autumnal design I would like to do. Somehow I can never manage to time seasonal things right! I do need to make some Christmas ornaments. Perhaps I can sneak a little one in before going on to the next project.
And. . . oh yes! There is always the rug that is calling me to finish it!
Just not enough hours in the day!
(Gracie must of course approve anything that comes into the house)!I love the cranberry reds. The prints are actually all different, but so carefully selected that they match perfectly! It also has indigo prints, black mourning prints, beautiful old browns, and lovely shirting prints! The backing is a white and brown shirting print.

It dates from the 1890's to 1910's. What is really remarkable is that even the binding was made from one of the cranberry prints, and it is intact, in excellent condition! That almost never happens!
I also picked up two other quilts with lots of indigo and mourning cloth prints, but they are definitely "fixer-uppers". The real prize was the crib quilt!
The only bad part of the day was when I fell on a pile of plastic bags that someone left out. Kaboom! I went down hard! Landed on my wrist. Luckily nothing is broken but oh boy does it ache! Oh well, the quilt was worth it!
At another garage sale I found this little Victorian angel pin cushion.
And, at another sale, I picked up an antique tea cosy. There is a different cross stitch design on each side.


I finished Picnic, the seventh design in The Red Thread.
I'm not sure that I like the snap on the flower, but I am completing it as designed.
Here is a picture of the whole thing so far.
Next is "Ocean Voyage".
Next, I transferred the pins into the sides of foam, so the sampler could be turned over.

Finally, I got it all laced and the corners stitched down.
When I turned it over it looked reasonably even.
Next, I cleaned both sides of the glass with warm water.
I laid the frame out on the table and placed the glass it it.
Because the sampler should not touch the glass. I needed to make spacers from the acid-free foam board. This actually turned out to be one of the hardest parts. I experimented with various shapes and finally decided that a right-angle shape worked best. I wedged these little pieces of foam-board into the corners.
Then, I took the opportunity to remove any remaining cat hairs off the sampler! LOL! It is really best if you can have the cats out of the room while you are doing this! Ha! Good luck with that! Those of you who have cats know what I mean! I have 6 of them!
Finally I placed the stretched sampler into the frame and covered it with another piece of acid-free foam board for the backing.
Next, I covered the back of the frame with brown paper to keep the dust out.

After the adhesive dried, I attached the eyes and wire for hanging.
The only thing left to do now is record the information about the sampler on a piece of paper and attach it to the back of the frame.
That's it! Finis!